A resurfaced pool deck lasts longest with a few simple habits. Here is what we tell every customer.
The first 30 days
You can walk on a new pool deck 24 hours after it is finished. If we fill the joints with Sikaflex, give it 48 hours to set before driving on it. Over the first week and through the first month the overlay keeps hardening, so lift furniture and set it down. Do not drag it.

Everyday cleaning
Rinse with a garden hose. For dirt that sticks, use dish soap and a medium nylon broom, then rinse well. If you use a pressure washer, keep it at 1,500 psi or below so you do not strip the sealer or color.
Grills, smokers and heavy furniture
The damage we see most often comes from what people set on the deck. Smokers and grills drip grease. Heavy iron or other metal furniture rusts over time and leaves stains where it sits. None of this is a reason to keep your deck bare. It is a reason to keep it sealed.
When the deck has a good coat of sealer, whether that is an acrylic or a polyaspartic, rust has a hard time sticking. Dirt comes off easily, and so does grease from a grill, because they stay on top of the sealer instead of soaking into the concrete. Once the sealer wears thin, they can soak in and stain.
If a deck has gone a long time without sealer and has rust stains, we typically remove them with a product called Folex. It is a gentle rust remover that does a very good job, and it is even safe on carpet and fabric. We still tell every customer the same thing: the best way to deal with rust is to keep the deck sealed so it never gets a grip.
How to tell if it is time to reseal
Sprinkle a little water on the deck. If the water beads up on top, the sealer is doing its job. If the water soaks in and darkens the surface, the sealer is worn and the deck needs to be resealed.
Pool chemicals and fertilizer
A sealed overlay resists chemicals but is not chemical-proof. Rinse concentrated pool chemicals and fertilizer off promptly, and skip acidic or citrus-based cleaners. Austin Stone holds up beautifully around salt water pools.
Resealing every 2 to 5 years
The sealer is what protects the color. Plan to reseal every 2 to 5 years depending on sun, traffic and texture. Our favorite sealer is a polyaspartic, which goes on a little thicker than a typical acrylic. Depending on the texture you chose, a polyaspartic can feel a bit more slippery, so we add an anti-slip aggregate to the sealer for traction. We also use a solvent-based acrylic sealer at about 25% solids. A 5-gallon pail covers about 800 square feet of an average textured deck, and up to about 1,000 square feet if the surface is very smooth.
We recommend calling us for either one. Both products are chemicals that are not safe to handle casually. A polyaspartic is especially hard: it has a very short pot life and is not forgiving, so it takes a lot of practice to get it down evenly and quickly.
On every reseal job we power wash the surface first, and then the deck needs time to dry. Neither sealer tolerates any moisture in the concrete underneath. If moisture is trapped, it can leave cloudy or white patches in the finished sealer. How long the deck needs to dry depends on the humidity and the heat that day. Our crews have been doing this for many years, and they know when to seal and when to wait based on the moisture, heat and weather.
A polyaspartic dries in about 8 hours. Even then, we do not put furniture back on either sealer until it has had a good 24 hours to cure, which is what most manufacturers recommend. We also wait at least 24 hours before having company over. You may be able to walk on the deck sooner, but do not subject it to heavy foot traffic or move furniture on it before the 24 hours is up, even if it feels dry to the touch.

Furniture and cracks
Put felt pads under furniture legs. If a crack appears, most stay stable and just need watching. If one starts to affect the pattern, we can re-grout it or apply a colored sealant, and the cost is usually small.
Prefer not to do it yourself? We offer professional resealing across Austin, San Antonio and Dallas. Call 512-461-4836. If you want to see our work first, we can show you finished jobs near you.

